mqttfastled/mqttfastled.ino

#include "mqttfastled.h"

#define FASTLED_ESP8266_NODEMCU_PIN_ORDER
#include <FastLED.h>
#include <ESP8266WiFi.h>
#include <PubSubClient.h>

// LED
CRGB leds[NUM_LEDS];
bool ledGo = false;

// WIFI
WiFiClient espClient;

// MQTT
char message_buff[100];
PubSubClient client(espClient);

void setup() { 
  Serial.begin(SERIAL_SPEED);
  Serial.println("\nresetting");
  
  // WIFI
  setupWifi();
  
  // MQTT
  client.setServer(mqtt_server, mqtt_port);
  client.setCallback(callbackMQTT);
  testConnectMQTT();
  client.subscribe("homeassistant/switch1");
  
  // LED
  LEDS.addLeds<CHIPSET,LED_PIN, COLOR_ORDER>(leds, NUM_LEDS);
  FastLED.setBrightness(BRIGHTNESS);
  fill_solid(leds, NUM_LEDS, CRGB::Black);
  FastLED.show();
}

// WIFI
void setupWifi() {
  Serial.println();
  Serial.print("Connexion a ");
  Serial.print(wifi_ssid);
  WiFi.begin(wifi_ssid, wifi_password);
  
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  
  Serial.println();
  Serial.print("IP : ");
  Serial.println(WiFi.localIP());
}

// MQTT
void testConnectMQTT() {
  while (!client.connected()) {
    Serial.print("Connexion au serveur MQTT... ");
    if (client.connect("ESP8266Client", mqtt_user, mqtt_password)) {
      Serial.println("OK");
    } else {
      Serial.print("KO, erreur : ");
      Serial.print(client.state());
      Serial.println(", on attend 5 secondes avant de recommencer");
      delay(5000);
    }
  }
}

// Déclenche les actions à la réception d'un message
void callbackMQTT(char* topic, byte* payload, unsigned int length) {
  unsigned int i = 0;
  Serial.print("Received [" + String(topic) + "] : ");
  
  // create character buffer with ending null terminator (string)
  for(i = 0; i < length; i++) {
    message_buff[i] = payload[i];
  }
  message_buff[i] = '\0';
  
  String msgString = String(message_buff);
  Serial.println(msgString);
  
  if (msgString == "ON") {
    ledGo = true;
  } else {
    ledGo = false;
  }
}

// LED
void ledCylon()
{
    // Effet cylon : on allume une led, on attends, on eteinds, on passe à la suivante
    for(int i = 0; i < NUM_LEDS; i++) {
      if ((i % 10) == 0) {
          client.loop();
      }
      
      leds[i] = CRGB::Red;
      FastLED.show(); 
      FastLED.delay(1000 / FRAMES_PER_SECOND); 
      leds[i] = CRGB::Black;
      FastLED.show(); 
      FastLED.delay(1000 / FRAMES_PER_SECOND);
    }
    for(int i = NUM_LEDS - 1; i > 0; i--) {
      if ((i % 10) == 0) {
          client.loop();
      }
      
      leds[i] = CRGB::Red;
      FastLED.show(); 
      FastLED.delay(1000 / FRAMES_PER_SECOND); 
      leds[i] = CRGB::Black;
      FastLED.show();
    }
    FastLED.delay(1000 / FRAMES_PER_SECOND);
}

void loop() {
  // MQTT
  testConnectMQTT();
  client.loop();
  
  EVERY_N_SECONDS(180) {
    Serial.print("MQTT Subscribe refresh");
    client.subscribe("homeassistant/select1");
    Serial.println(" done");
  }
  
  // LED
  if (ledGo) {
    ledCylon();
  } else {
    fill_solid(leds, NUM_LEDS, CRGB::Black);
    FastLED.show();
    FastLED.delay(1000 / FRAMES_PER_SECOND);
  }
}