diff --git a/arduino/mqttfastledmenu/mqttfastledmenu.cpp b/arduino/mqttfastledmenu/mqttfastledmenu.cpp
index 25dbb00..237d03b 100644
--- a/arduino/mqttfastledmenu/mqttfastledmenu.cpp
+++ b/arduino/mqttfastledmenu/mqttfastledmenu.cpp
@@ -9,22 +9,6 @@
 
 #include "mqttfastledmenu.h"
 
-// LED
-int brightness = LED_BRIGHTNESS_DEFAULT;
-int color = LED_COLOR_DEFAULT;
-int speed = LED_SPEED_DEFAULT;
-CRGB leds[LED_NUM];
-String ledEffect = LED_EFFECT_ERROR;
-boolean ledState = false;
-
-// WIFI
-WiFiClient espClient;
-
-// MQTT
-char message_buff[100];
-PubSubClient client(espClient);
-
-
 void setup()
 {
   Serial.begin(SERIAL_SPEED);
@@ -39,26 +23,33 @@ void setup()
   testConnectMQTT();
 
   // LED
+  brightness = LED_BRIGHTNESS_DEFAULT;
+  color = LED_COLOR_DEFAULT;
+  speed = LED_SPEED_DEFAULT;
+  ledEffect = LED_EFFECT_ERROR;
+  ledState = false;
+
   LEDS.addLeds<LED_CHIPSET,LED_PIN, LED_COLOR_ORDER>(leds, LED_NUM).setCorrection(TypicalSMD5050);
   ledBlackAll();
   FastLED.setBrightness(brightness);
+
+  //////////////////////////////// ColorPalette ///////////////////////////////
+  currentPalette = RainbowColors_p;
+  currentBlending = LINEARBLEND;
+  //////////////////////////////// ColorPalette ///////////////////////////////
   Serial.println("Ready");
 
   /* MQTT
   * Il est important de faire un loop avant toute chose,
   * afin de récupérer les valeurs provenant du broker mqtt
   * et pas démarrer avec de vieilles infos.
+  * Il faut un certains nombres de tentative pour tout récuperer.
   */
   for (short int i = 0; i < 10; i++) {
     delay(200);
     client.loop();
   }
 
-  //////////////////////////////// ColorPalette ///////////////////////////////
-  currentPalette = RainbowColors_p;
-  currentBlending = LINEARBLEND;
-  //////////////////////////////// ColorPalette ///////////////////////////////
-
   Serial.println("End of setup");
 }
 
diff --git a/arduino/mqttfastledmenu/mqttfastledmenu.example.h b/arduino/mqttfastledmenu/mqttfastledmenu.example.h
index 2ee2ea4..d7a1c03 100644
--- a/arduino/mqttfastledmenu/mqttfastledmenu.example.h
+++ b/arduino/mqttfastledmenu/mqttfastledmenu.example.h
@@ -4,6 +4,7 @@
 #define LED_NUM 300
 #define LED_PIN  5 // = D1
 #define LED_CHIPSET     WS2812B
+// TODO: https://github.com/bruhautomation/ESP-MQTT-JSON-Digital-LEDs/blob/master/ESP_MQTT_Digital_LEDs/ESP_MQTT_Digital_LEDs.ino#L175 essayer BGR
 #define LED_COLOR_ORDER GRB
 #define LED_BRIGHTNESS_DEFAULT 96
 #define LED_SPEED_DEFAULT 120
@@ -16,10 +17,19 @@
 #define LED_EFFECT_FULLRED "full"
 #define LED_EFFECT_ERROR   "error"
 
+int brightness;
+int color;
+int speed;
+CRGB leds[LED_NUM];
+String ledEffect;
+boolean ledState;
+
 // WIFI
 #define WIFI_SSID     "XXX"
 #define WIFI_PASSWORD "XXX"
 
+WiFiClient espClient;
+
 // MQTT
 #define MQTT_SERVER "XXX"
 #define MQTT_PORT   1883
@@ -37,6 +47,10 @@
 #define MQTT_LED_COLOR_COMMAND      "strip1/color/switch"
 #define MQTT_LED_COLOR_STATE        "strip1/color/status"
 
+char message_buff[100];
+PubSubClient client(espClient);
+
+
 void setupWifi();
 void testConnectMQTT();
 void callbackMQTT(char* topic, byte* payload, unsigned int length);